OVHcloud Black Friday ideas: Proxmox VE on OVHcloud dedicated servers

Search for a command to run...

No comments yet. Be the first to comment.
QM agent is Y Combinator's July 2026 multiplayer harness for work; by August 4, its GitHub repository had about 9,700 stars. It gives each employee and project a scoped workspace, memory, keychain vie

A Codex long-running agent workflow succeeds when responsibility, state, wake conditions, acceptance criteria, and stopping boundaries remain visible and reviewable. OpenAI developer experience lead J

The Codex–ChatGPT Pro dual-agent workflow separates implementation from acceptance; it does not prove that one AI system is the strongest coding agent. Codex can hold the repository, requirements, per

Japan's physical AI strategy entered an execution phase in 2026, with a national model program running through 2030. The government is funding factory-data preparation and robotics foundation models.

The AI infrastructure bubble may stay contained while chips, power, and construction capacity remain scarce. In July 2026, NVIDIA CEO Jensen Huang told Axios that a bubble was highly unlikely within f

✅ Proxmox VE works excellently on OVH dedicated servers. OVH even provides a pre-installed Proxmox VE option for many server models.
During server purchase or reinstallation in the OVH Control Panel:
Select "Proxmox VE" from the OS list (available on most recent servers)
OVH handles the base installation automatically
You receive Proxmox ready-to-use via the web interface
If the template isn't available or you need a custom version:
Access IPMI/iKVM from your OVH control panel
Mount the Proxmox VE ISO
Install as you would on any bare-metal server
OVH's network setup is non-standard and must be configured manually in Proxmox:
For single server (no vRack):
Main IP: Your assigned server IP (e.g., 192.51.100.10)
Gateway: IP ending in .254 (e.g., 192.51.100.254) - NOT .1
Netmask: Typically 255.255.255.255 (/32)
Bridge: Create a vmbr0 bridge for VMs
Configuration steps:
During Proxmox install, use OVH's rescue mode to find your gateway
In Proxmox web UI, go to Network → create vmbr0
Configure vmbr0 with your main IP and the .254 gateway
For additional failover IPs, add them as /32 IPs to vmbr0
| Feature | Status | Notes |
| Hardware | ✅ Fully compatible | Standard Intel/AMD CPUs, NICs work great |
| Performance | ✅ Excellent | Bare-metal access, no virtualization overhead |
| OVH Support | ⚠️ Limited | OVH supports hardware/network only, not Proxmox software |
| Anti-DDoS | ✅ Works | Automatic, no special config needed |
| vRack | ✅ Supported | Requires specific network config for private VLANs |
| Failover IPs | ✅ Supported | Can assign to VMs individually |
| IPv6 | ✅ Supported | Configure with OVH's IPv6 gateway |
Use the OVH template when available to save time
Document your network settings before installation
Configure backups: Use Proxmox Backup Server or OVH's backup storage options
Update Proxmox: Subscribe to Proxmox Enterprise repo or use no-subscription repo
Firewall: Use Proxmox's built-in firewall or OVH's Network Firewall
Monitoring: Set up monitoring for hardware (via IPMI) and VMs
OVH Network Guide: docs.ovh.com/gb/en/dedicated/networking/
Proxmox Forum: Many OVH-specific threads
OVH Community: Active Proxmox discussions
Bottom line: It's a proven, production-ready combination used by thousands. Just pay attention to the network configuration, and you'll be fine.